A closer look

Installation & repair

Think through joints, fitting and the details that need fixing.

A sensible order for replacing interior trim

The order of work should resolve the room's fixed edges first, then leave room for fitting, finishing and the parts that move.

Installation & repair

A piece can be measured correctly and still go to the wrong wall. Labels keep its location, orientation and finished face attached to the material.

Installation & repair

A joint should be evaluated with both pieces in their installed positions. Pressing two loose ends together can hide the problem you need to see.

Installation & repair

A room corner rarely owes the installer an exact right angle. Measure the actual surfaces and test the joint before blaming the saw.

Installation & repair

Both approaches can make a neat inside corner. The material, profile and finish determine which one is sensible for the job.

Installation & repair

The shape of an open miter can reveal a length, angle or seating problem. Diagnose it before reaching for filler.

Installation & repair

When one molding length cannot span the wall, the location and support of the join deserve as much thought as the cut itself.

Installation & repair

A dipping floor creates a choice between the top line and the lower fit. Map the variation before deciding how to resolve it.

Installation & repair

A long straight board can expose every change in a wall. Decide whether the board, the backing or the finish detail needs attention.