Baseboards & casings
The Small Reveal That Makes Door Casing Look Deliberate
A consistent strip of exposed jamb helps a doorway read as a carefully assembled set of parts.
Read the guideA closer look
The guide shelf
Browse by the detail you want to change, the material you have, or the problem you need to solve.
Wall paneling
Beadboard or V-Groove: Comparing the Lines Up Close
Compare the repeated shadow, board width, and available construction rather than choosing by the name alone.
Read the guide
Materials & tools
Primed and prefinished molding are different purchases
One is prepared for a finish coat; the other arrives with a finished surface. That difference changes the order, handling and touch-up plan.
Read the guide
Installation & repair
Put a long-run trim joint where it can behave
When one molding length cannot span the wall, the location and support of the join deserve as much thought as the cut itself.
Read the guide
Paint & finish
Choose primer for the problem under the finish
Primer should answer a specific surface problem. Adhesion, stain blocking and absorption control are related but not interchangeable jobs.
Read the guide
Room planning
Build a trim budget around more than linear feet
The board price is only one line in the estimate. Junctions, preparation and finishing can change the cost of a modest-looking project.
Read the guide
Baseboards & casings
A Simple Built-Up Door Header Without Heavy Proportions
A few plain boards can frame a doorway well when their overhangs and depth are kept in proportion.
Read the guide
Wall paneling
Horizontal and Vertical Wall Planks Change Different Things
Direction changes the pattern, but product requirements and edge conditions still govern the installation.
Read the guide
Materials & tools
When a curved wall calls for flexible molding
A curved wall needs a material and profile that can follow its geometry. A flexible product is not a substitute for measuring the curve.
Read the guide
Installation & repair
Fitting baseboard above a floor that dips
A dipping floor creates a choice between the top line and the lower fit. Map the variation before deciding how to resolve it.
Read the guide
Paint & finish
Factory-primed trim still needs a close inspection
Factory primer is a useful starting surface, but transport marks, exposed ends and installation repairs still need attention.
Read the guide
Room planning
Make a whole-house trim schedule before room one
A short record of profiles and junctions can prevent a sequence of small purchases from becoming a house full of near matches.
Read the guide